Simulation of adaptive optics for the Vacuum Tower Telescope

A simulation model of the adaptive optics of the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Tenerife, is presented. The model uses modules from the integrated model of the Euro50 extremely large telescope, and includes submodels of a Shack-Hartmann wavefront sensor, a de-formable mirror, a tip-tilt mirror, high-voltage amplifier low-pass filters, a reconstructor and a controller. We investigate the impact on the closed loop bandwidth of changes in controller configuration and certain system parameters, such as low pass filter bandwidth and camera integration and readout time. Control strategies were tested on simple models before implementation on the full VTT model. Using the models, different control strategies are compared.     

A Quantitative Method to Optimise Magnetic Field Line Fitting of Observed Coronal Loops

Many authors use magnetic-field models to extrapolate the field in the solar corona from magnetic data in the photosphere. The accuracy of such extrapolations is usually judged qualitatively by eye, where a less judgemental quantitative approach would be more desirable. In this paper, a robust method for obtaining the best fit between a theoretical magnetic field and intensity observations of coronal loops on the solar disk will be presented. The method will be applied to Yohkoh data using a linear force-free field as an illustration. Any other theoretical model for the magnetic field can be used, provided there is enough freedom in the model to optimize the fit.     

Structurally controlled gold and sulfosalt mineralization: the Altenberg example, Salzburg Province, Austria

Summary ?In the south-eastern Altenbergkar–Silbereck area in the eastern Tauern window (Lungau, Salzburg) structurally controlled precious-metal (Au–Ag) mineralization is hosted in marbles of the Permo(?)-Mesozoic Silbereck Formation and in the underlying Variscan Central gneiss. During the Alpine otogeny both lithologies were affected by ductile deformation (shearing, D1; folding, D2/D3) and subsequent brittle deformation (tension gashes, D4; normal faulting, D5) related to the uplift and exhumation of the Tauern window. Mineralization is controlled by brittle D4 structures. NE–SW trending steeply dipping tension gashes of the “Tauerngoldgang” type occur within the Central gneiss. Three different marble-hosted ore types following fracture systems as well as foliation and bedding planes can be distinguished: 1) metasomatic replacement ores, 2) ores in tension gashes and 3) ores in talc-bearing structures, often containing high-grade gold and silver mineralization (native gold in association with Ag–Pb–Bi–sulfosalts). Four stages of mineralization can be distinguished which occur in all ore types: arsenopyrite–pyrite–pyrrhotite (first stage), Au–(Ag–Pb–Bi–sulfosalts) (second stage), base-metal sulfides and tetrahedrite–tennantite (third stage) and Ag-rich galena (fourth stage). Preliminary fluid inclusion data indicate temperatures of ore formation well above 300 °C (346 °C mean) for the second stage within the Central gneiss and temperatures between 310 and 230 °C for the second and third stages in the marble. Received October 12, 2001; revised version accepted September 5, 2002 Published online March 10, 2003     

Richtmyer-Meshkov Experiments on the Omega Laser

Observations of the interstellar medium reveal a dynamic realm permeated by shocks. These shocks are generated on a large range of scales by galactic rotation, supernovae, stellar winds, and other processes. Whenever a shock encounters a density interface, Richtmyer-Meshkov instabilities may develop. Perturbations along the interface grow, leading to structure formation and material mixing. An understanding of the evolution of Richtmyer-Meshkov instabilities is essential for understanding galactic structure, molecular cloud morphology, and the early stages of star formation. An ongoing experimental campaign studies Richtmyer-Meshkov mixing in a convergent, compressible, miscible plasma at the Omega laser facility. Cylindrical targets, consisting of a low density foam core and an aluminum shell covered by an epoxy ablator, are directly driven by fifty laser beams. The aluminum shell is machined to produce different perturbation spectra. Surface types include unperturbed (smooth), single-mode sinusoids, multi-mode (rough), and multi-mode with particular modes accentuated (specified-rough). Experimental results are compared to theory and numerical simulations.     

Effect of metamorphism and partial melting of host rocks on zircons

Abstract Zircons have been studied from different layers of migmatites (from Arvika, western Sweden and Nelaug, southern Norway) and from a paragneiss (from Arvika) associated with one of the migmatites. The main purpose of the investigation is to establish whether or not information about zircons can help in the elucidation of the parentage and rock-forming processes of migmatites.
The elongation ratio of zircons from all layers is small and characteristic of sedimentary zircons. Further, the absence of characteristic colours and the growth trends of the zircons (indicated by the reduced major axes) observed in the various samples both support a sedimentary parentage for these rocks. The zircons of all layers exhibit secondary growth (overgrowth, outgrowth and multiple growth) due to metamorphism. Compared with the zircons from the paragneiss, those of the migmatite layers are more clouded and less rounded, some of them becoming opaque or even skeletal; this is especially true of the zircons from the leucosomes. These observations indicate an alteration of the original sedimentary zircons in the migmatite, especially in the leucosomes, in response to the migmatization process, previously interpreted as partial melting.     

An efficient technique for pre-selecting low-redshift damped Lyα systems

The number of z ∼ 1 damped Lyα systems (DLAs, log  N (H  i ) ≥ 20.3) per unit redshift is approximately 0.1, making them relatively rare objects. Large, blind QSO surveys for low-redshift DLAs are therefore an expensive prospect for space-borne ultraviolet telescopes. Increasing the efficiency of these surveys by pre-selecting DLA candidates based on the equivalent widths (EWs) of metal absorption lines has previously been a successful strategy. However, the success rate of DLA identification is still only ∼35 per cent when simple EW cut-offs are applied, the majority of systems having 19.0 < log  N (H  i ) < 20.3. Here, we propose a new way to pre-select DLA candidates. Our technique requires high-to-moderate-resolution spectroscopy of the Mg  ii λ2796 transition, which is easily accessible from the ground for 0.2 ≲ z ≲ 2.4. We define the D -index, the ratio of the line equivalent width to velocity spread, and measure this quantity for 19 DLAs and eight sub-DLAs in archival spectra obtained with echelle spectrographs. For the majority of absorbers, there is a clear distinction between the D -index of DLAs compared with sub-DLAs (Kolmogorov–Smirnov probability = 0.8 per cent). Based on this pilot data sample, we find that the D -index can select DLAs with a success rate of up to 90 per cent, an increase in selection efficiency by a factor of 2.5 compared with a simple EW cut. We test the applicability of the D -index at lower resolution and find that it remains a good discriminant of DLAs for full width at half-maximum (FWHM) ≲ 1.5 Å. However, the recommended D -index cut-off between DLAs and sub-DLAs decreases with poorer resolution and we tabulate the appropriate D -index values that should be used with spectra of different resolutions.     

Theoretical and experimental lifetime and oscillator strength determination in singly ionized neodymium (Nd ii)

Radiative lifetime measurements were performed with time-resolved laser-induced fluorescence techniques for 24 levels of Nd  ii in the energy range 20 500–32 500 cm⁻¹. For 17 levels, no previous experimental data exist. These results have allowed the testing of new theoretical calculations with the relativistic Hartree–Fock method taking configuration interactions and core-polarization effects into account, and a satisfying agreement has been found for this complex ion. A new set of calculated oscillator strengths, accurate within a few per cent for the strongest transitions, is presented for 107 lines of astrophysical interest appearing in the wavelength range 358.0–1100.0 nm. These results will be useful to evaluate abundance values of neodymium in chemically peculiar stars in relation with cosmochronology.     

Similarities between Circular Polarization in Galactic Jet Sources and AGN

We compare the observational properties of the circular polarization in Galactic jet sources with that observed in AGN, and outline the constraints they place on the mechanism responsible for the circular polarization. We also discuss the implications of the time scale of polarization variations on the mechanism responsible for the circular polarization.     

Tidal dwarfs in the M81 group: the second generation?

We present a quantitative star formation history derivation of the four suspected tidal dwarf galaxies in the M 81 group: Holmberg IX, BK3N,Arp-loop (A0952+69) and Garland using HST/WFPC2 images of these galaxies. We construct a library of synthetic Colour-Magnitude Diagrams(CMDs) based on theoretical isochrones and data-derived determinations of photometric errors. These synthetic CMDs were combined linearly andχ²-compared to observed photometry. All the galaxies show continuous star formation between about 20 and 200 Myr ago with star formation rates between 7.5⋅10^-3 M_⊙/yr and 7.67⋅10^-4 M_⊙/yr. The metallicity of the detected stars is spanning rather a wide range, being lower than solar abundance. We suppose, that all the galaxies were formed out of material from metal-poor outer part of the giant spiral galaxy M81after tidal interaction about 200 Myr ago. However, this suggestion requires significantly more deep color-magnitude diagrams to be sure with the scenario of the galaxy evolution. This revised version was published online in July 2006 with corrections to the Cover Date.     

Optical colors of 56 near-Earth objects: trends with size and orbit

We present the results of BVRIZ photometry of 56 near-Earth objects (NEOs) obtained with the 1-m Jacobus Kapteyn telescope on La Palma during 2000 and 2001. Our sample includes many NEOs with particularly deep 1-μm pyroxene/olivine absorption bands, similar to Q-type asteroids. We also classify three NEOs with particularly blue colors. No D-type asteroids were found, placing an upper limit of ∼2% on the fraction of the NEO population originating in the outer main belt or the Trojan clouds. The ratio of dark to bright objects in our sample was found to be 0.40, significantly higher than current theoretical predictions. As well as classifying the NEOs, we have investigated color trends with size and orbit. We see a general trend for larger silicate objects to have shallower absorption bands but find no significant difference in the distribution of taxonomic classes at small and large sizes. Our data clearly show that different taxonomic classes tend to occupy different regions of (a, e) space. By comparing our data with current model predictions for NEO dynamical evolution we see that Q-, R-, and V-type NEOs tend to have orbits associated with “fast track” delivery from the main belt, whereas S-type NEOs tend to have orbits associated with “slow track” delivery. This outcome would be expected if space weathering occurs on time scales of >10⁶ years.